Spot the problem.

**cradeldorf** · May 3rd, 2013, 03:33 AM

Lets see how good you guys are.

Altec 604B Speaker 604 B Part for Parts or Repair | eBay

**tomt** · May 3rd, 2013, 04:22 AM

the dollar is not included ...

**Altec Best** · May 3rd, 2013, 07:30 AM

Well obviously it's missing the HF driver and basket,diaphragm.

**alancohen** · May 3rd, 2013, 08:38 AM

The problem is someone bid on it.

**badtoby** · May 3rd, 2013, 02:12 PM

Bug screen?

**Audio_by_Goodwill** · May 3rd, 2013, 08:31 PM

If it goes low enough, I could see someone buying it to have Bill rebuild it. As long as it was disassembled and cleaned adeqautly, I wouln't think it would be any trouble for Bill to build a speaker with it than with all new parts.

**Phil-G** · May 3rd, 2013, 11:13 PM

Originally Posted by Audio_by_Goodwill

If it goes low enough, I could see someone buying it to have Bill rebuild it. As long as it was disassembled and cleaned adeqautly, I wouln't think it would be any trouble for Bill to build a speaker with it than with all new parts.

yeah, for less than 75$ it might have possibilities

**cradeldorf** · May 4th, 2013, 12:19 AM

My bad, I was thinking there should be a voice coil gap for the Phragm. But apparently theres another magnet setup that's missing for the HF. I don't know why I though they both used the same magnet setup. and yes BadToby That bug screen looks glued in with a big sloppy glob o silicone. I bet that helped smooth the flow....

**Audio_by_Goodwill** · May 4th, 2013, 10:04 AM

Originally Posted by cradeldorf

My bad, I was thinking there should be a voice coil gap for the Phragm. But apparently theres another magnet setup that's missing for the HF. I don't know why I though they both used the same magnet setup. and yes BadToby That bug screen looks glued in with a big sloppy glob o silicone. I bet that helped smooth the flow....

The large format duplexes use the same magnet, although, I've never seen one taken apart.